Menu

Squirrel Daddy Gunsmith Roll Pin Holding Starter Punch Tool Set with Hollow End


As an Amazon Associate I earn from qualifying purchases.
#ad
#ad
Squirrel Daddy #ad - Use our hollow end punches to align and start the pin then finish driving it home with an impact punch. Specifically designed for jewelers, gunsmith, watchmakers, repairs and crafts. Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started. Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started.

Actually made in uSA with Stainless Steel from USA melts. Use our hollow end punches to align and start the pin then finish driving it home with an impact punch. Stainless steel body is 2. 75" long and holds all roll pins metric or inch from 1/16" to 1/8".

More information about Squirrel Daddy #ad

MARKETTY Gunsmithing Hammer with 4 Tips

#ad
#ad
MARKETTY XMS1425 #ad - Nylon face is non-marring and great for alignment. Includes 4 tips. Handy tool at the bench or on the range. 9" overall. Brass face can be used for driving pins and punches.

More information about MARKETTY XMS1425 #ad


Similar products

TEKTON Gunsmith Punch Set, 18-Piece | 66564 #ad
Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad
Grip 9 pc Roll Pin Punch Set Gunsmithing #ad
BOOSTEADY All-in-One Gun Cleaning Kit with Grip Roll Pin Punch Tool Set, Gun Cleaning Brush Pick Kit, Anti-Rust Silicone Cloth in Zippered Organizer Space Saving Carry Case (15 Pieces) #ad
Impresa Products Universal Bench Block - Ideal for M1911 and M 1911-Style Pistols, Glock, 10/22s and More - Ideal Armorers Block and Gun Smithing/Gunsmithing Tool #ad
Xage 9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case #ad
Best Gunsmith Grip Roll Pin Punch Tool Set in Zippered Organizer Carry Case (9 Pieces) BOOSTEADY #ad
Lyman Products X-Block Magnetic Gunsmith Bench Block #ad
Castle Nut Wrench Tool for removal or installation #ad
RAM-PRO Roll Pin Punch Set with Storage Pouch, 9 Piece Steel Removal Tool Kit | Perfect for Jewelry, Watches, Gun Rifle (AR-15) Spring/Tension Pins #ad


Grip 9 pc Roll Pin Punch Set Gunsmithing

#ad
#ad
Grip 097257611356 #ad - Includes roll-up storage pouch. Sizes - 1/16" x 2 3/4", 7/32" x 5", 1/8" x 4", 3/16" x 4 3/4", 5/32" x 4 1/2", 1/4" x 5 1/2", 5/64" x 3 1/4", 3/32" x 3 1/2", 5/16" x 6 1/4". Nylon face is non-marring and great for alignment. Brass face can be used for driving pins and punches. Drop forged and heat treated steel.

Drop forged, heat treated steel. Includes roll-up storage pouch. 9" overall. Includes 4 tips. Use for fast and safe removal of pins. Use for fast and safe removal of pins.

More information about Grip 097257611356 #ad


Similar products

TEKTON 30812 Double-Faced Soft Mallet, 35 mm #ad
Gotical Gunsmithing Roll Pin Starter Punch Set #ad
MARKETTY Gunsmithing Hammer with 4 Tips #ad
Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad
Fixxxer Hollow End Stainless Steel Starter Punch Set #ad
Magpul MOE Polymer Trigger Guard, Black #ad
Aeroshell 33ms / MIL-G-21164D / MIL-SPEC Barrel Nut Thread Grease + 1/2oz can #ad
Umbrella Corporation AeroShell 33MS / 64 Gun Grease .5oz / Mil-Spec for Barrel Nut Thread #ad
SE 8436MVC 3" Universal Table Vise #ad
Real Avid .223 Pivot Pin Tool #ad


Aeroshell 33ms / MIL-G-21164D / MIL-SPEC Barrel Nut Thread Grease + 1/2oz can

#ad
#ad
MCARBO #ad - 9" overall. Drop forged and heat treated steel. Includes roll-up storage pouch. Includes 4 tips. Brass face can be used for driving pins and punches. Double the size 1/2 oz can of mil-spec lithium barrel nut grease;mil-g-21164d aeroshell 33ms grease is a shiny metallic gray and even smells like the Armory;Also includes a pair of large black industrial grade nitrile gloves and a 6 aluminum chemical applicator brush;Aeroshell 33ms is an extreme heat and pressure grease that's designed to outlast anything else on the market;Aeroshell 33ms is a Synthetic Hydrocarbon Lithium Complex Grease with Molybdenum Disulphide Nylon face is non-marring and great for alignment.

Use for fast and safe removal of pins. Aeroshell 33ms / mil-g-21164d / mil-spec barrel Nut Thread Grease + 1/2oz can.

More information about MCARBO #ad


Similar products

FieldSport AR Free Float Handguard Rail Barrel Nut Washer Shims -20 PC Pack. For 223/556 #ad
Real Avid .223 Pivot Pin Tool #ad
Sunex 97740 1/2-Inch Drive, 1-1/4-Inch Jumbo Crowfoot Wrench, Alloy Steel #ad
Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad
5.56mm NATO MAX and 5.56mm NATO MIN Headspace Gauge Set #ad
Grip AR-15 Roll Pin Tool Kit #ad
Sunex 97736 1/2-Inch Drive 1-1/8-Inch Jumbo Crowfoot Wrench #ad
Wheeler Receiver Lapping Tool #ad
Geissele Automatics (09-109) AR15/M4 Armorer's Package #ad
TACFUN 1/2" x28 Thread Steel Crush Washer (pack of 10) for .223 #ad


Wheeler 710906 Engineering Bolt Catch Install Tool Kit

#ad
#ad
Battenfeld Technologies 710906 #ad - 1 with counter-bored tips to start roll pins. 1 with indexing tips to finish roll pins. Flat on one side for proper alignment. Use for fast and safe removal of pins. 9" overall. Brass face can be used for driving pins and punches. Includes 4 tips. Aeroshell 33ms / mil-g-21164d / mil-spec barrel Nut Thread Grease + 1/2oz can.

Includes roll-up storage pouch. Start bolt catch roll pin easily with starter punch. Drop forged and heat treated steel. Finish installation flush with the finishing punch. Wheeler engineering bolt catch Install Tool Kit: start bolt catch roll pin easily with starter punch and finish installation flush with the finishing punch.

Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad - Nylon face is non-marring and great for alignment. Flat on one side for proper alignment and rubber over-molded to prevent damage to firearm.

More information about Battenfeld Technologies 710906 #ad


Similar products

Wheeler Trigger Guard Install Tool #ad
Real Avid .223 Pivot Pin Tool #ad
Wheeler Engineering Roll Pin Starter Punch Set #ad
Wheeler 110128 Master Roll Pin Punch Set #ad
Wheeler Roll Pin Punch Set #ad
Fixxxer Hollow End Stainless Steel Starter Punch Set #ad
5.56 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set SKU 946 #ad
Grace USA - Roll Spring (Pin) Holder Set - RSH-5 - Gunsmithing - Roll Pin Holders - 5piece - Gunsmith Tools & Accessories #ad
Umbrella Corporation AeroShell 33MS / 64 Gun Grease .5oz / Mil-Spec for Barrel Nut Thread #ad
Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance #ad


RS7 - Gunsmith Tools & Accessories - Steel Punches - Gunsmithing - 7 piece - Steel Roll Spring Punch Set - Grace USA

#ad
#ad
Pro Ears RS-7 #ad - This high quality hardened steel 7 piece punch set is designed to easily remove roll pins from firearms. Start bolt catch roll pin easily with starter punch. Finish installation flush with the finishing punch. Aeroshell 33ms / mil-g-21164d / mil-spec barrel Nut Thread Grease + 1/2oz can. Balled tip helps locate the punch on the pin and Protects Pin Ends From Damage During Removal Or Installation Nylon face is non-marring and great for alignment.

Includes 4 tips. Includes roll-up storage pouch. 9" overall. This high quality hardened steel 7 Piece Punch Set Is Designed To Easily Remove Roll Pins From Firearms. Brass face can be used for driving pins and punches. Flat on one side for proper alignment. Drop forged and heat treated steel. Use for fast and safe removal of pins.

RS7 - Gunsmith Tools & Accessories - Steel Punches - Gunsmithing - 7 piece - Steel Roll Spring Punch Set - Grace USA #ad - Balled tip helps locate the punch on the pin and protects pin ends from damage during removal or installation. 1 with indexing tips to finish roll pins. Set contains one 1 1/16";, 5/64";, 3/16";, 3/32";, 5/32";, 1/8";, and 7/32"; diameter punches. Made in the USA.

More information about Pro Ears RS-7 #ad


Similar products

Grace USA - Roll Spring (Pin) Holder Set - RSH-5 - Gunsmithing - Roll Pin Holders - 5piece - Gunsmith Tools & Accessories #ad
Grace USA - 8 Ounce Delrin Tipped Brass Hammer - 8DT -Gunsmithing - Hammers - 8 ounce - Gunsmith Tools & Accessories #ad
Grace USA - SHORT Roll Steel Spring Punch Set - SRS7 - Gunsmithing - Steel Punches - 7 piece -Gunsmith Tools & Accessories #ad
Grace USA - Gun Care Steel Punch Set - PS7 - Gunsmithing - Steel Punches - 7 piece - Gunsmith Tools & Accessories #ad
Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance #ad
Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad
Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad
Grace USA - Gun Care Brass Pin Punch Set - PS8 - Gunsmithing - Brass Punches - 8 piece - Gunsmith Tools & Accessories #ad
Grace Tools - Hook and Pick Set - 6-Piece Set - HP6- Gunsmith Tools and Accessories #ad
Aeroshell 33ms / MIL-G-21164D / MIL-SPEC Barrel Nut Thread Grease + 1/2oz can #ad


Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block

#ad
#ad
Real Avid AVSBBLK Smart Bench Block #ad - Perfect for: gunsmiths of all skill ranges; Gun owners who are looking to do more detailed work; Gun enthusiasts who are looking to work on all types of guns. Balled tip helps locate the punch on the pin and protects pin ends from damage during removal or installation. Set contains one 1 1/16";, 3/16";, 5/64";, 5/32";, 1/8";, 3/32";, and 7/32"; diameter punches.

Made in the USA. Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. 1 with counter-bored tips to start roll pins. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. So intelligently designed, you’ll feel smarter just using it.

Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad - Specs: diameter: 3 3/4"; thickness: 1 ¼ directions for Using the Magnet: The magnet is on the interior edge of the Smart Bench Block. 9" overall. Finish installation flush with the finishing punch. After you punch a pin, lightly move the block around on your work surface to ensure that the pin contacts the magnetized edge.

Includes 4 tips. Brass face can be used for driving pins and punches.

More information about Real Avid AVSBBLK Smart Bench Block #ad


Similar products

MARKETTY Gunsmithing Hammer with 4 Tips #ad
TEKTON Gunsmith Punch Set, 18-Piece | 66564 #ad
Real Avid AVHPS Accu-Punch Hammer & Punches #ad
Real Avid .223 Pivot Pin Tool #ad
Wheeler Engineering Hammer and Punch Set with Brass, Steel, Plastic Punches, Brass/Polymer Hammer and Storage Case for Gunsmithing Maintenance #ad
Winchester 51 Piece Gunsmith Screwdriver Set #ad
Twod Roll Pin Punch Set with Storage Pouch, 9 Piece Steel Removal Tool Kit for Jewelry, Watches,Rifle Pins with Holder #ad
Xage 9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case #ad
Grip 9 pc Roll Pin Punch Set Gunsmithing #ad
TEKTON 30812 Double-Faced Soft Mallet, 35 mm #ad


Umbrella Corporation AeroShell 33MS / 64 Gun Grease .5oz / Mil-Spec for Barrel Nut Thread

#ad
#ad
Aeroshell #ad - Aeroshell 33ms / mil-g-21164d / mil-spec barrel Nut Thread Grease + 1/2oz can. If in doubt, buy two and give one to your buddy* when you realize that you'll never use it all. Flat on one side for proper alignment. Aeroshell grease that meets mil-spec MIL-G-21164D for barrel nut assembly on AR platform upper receiver threads.

Includes roll-up storage pouch. 1 with counter-bored tips to start roll pins. High quality lube good for any number of applications, reels, bicycle gears, exercise equipment, ball bearings, hinges, even telescope mounts. Aeroshell 64 / aeroshell 33 MS sets the standard with exceptional anti-corrosion and anti-wear performance.

Umbrella Corporation AeroShell 33MS / 64 Gun Grease .5oz / Mil-Spec for Barrel Nut Thread #ad - Mil-g-21164d for upper receiver threads, barrel nut installation and buffer tube installation. Brass face can be used for driving pins and punches. Nylon face is non-marring and great for alignment. Set contains one 1 1/16";, 1/8";, 3/32";, 5/64";, 5/32";, 3/16";, and 7/32"; diameter punches. Made in the USA.

Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Drop forged and heat treated steel.

More information about Aeroshell #ad


Similar products

Castle Nut Wrench Tool for removal or installation #ad
Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad
FieldSport AR Free Float Handguard Rail Barrel Nut Washer Shims -20 PC Pack. For 223/556 #ad
Sunex 97740 1/2-Inch Drive, 1-1/4-Inch Jumbo Crowfoot Wrench, Alloy Steel #ad
Geissele Automatics Gas Block Roll Pin Tool #ad
Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad
Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single #ad
Real Avid .223 Pivot Pin Tool #ad
Red Iron Hollow End Stainless Steel Starter Punch Set(4 Pieces) #ad
Xage 9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case #ad


Gunsmithing - Grace USA - SRS7 - 7 piece -Gunsmith Tools & Accessories - Steel Punches - SHORT Roll Steel Spring Punch Set

#ad
#ad
Pro Ears SRS7 #ad - Drop forged and heat treated steel. The grace usa srs7, a 7 piece short roll pin punch Set, is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch. Finely crafted with care and precision in the USA. Start bolt catch roll pin easily with starter punch. 9" overall.

Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. A steady and stable work surface: the non-slip outer ring steadies the block during use and the inner groove keeps barrels stable during detailed work. Made from quality 5/16 Hex stock. Mil-g-21164d for upper receiver threads, barrel nut installation and buffer tube installation.

Gunsmithing - Grace USA - SRS7 - 7 piece -Gunsmith Tools & Accessories - Steel Punches - SHORT Roll Steel Spring Punch Set #ad - Brass face can be used for driving pins and punches. Includes roll-up storage pouch. Nylon face is non-marring and great for alignment. Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy. Made in the USA.

Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Made to perform under extreme pressure and heat to prevent damage.

More information about Pro Ears SRS7 #ad


Similar products

Grace USA - Steel Roll Spring Punch Set - RS7 - Gunsmithing - Steel Punches - 7 piece - Gunsmith Tools & Accessories #ad
Grace USA - Roll Spring (Pin) Holder Set - RSH-5 - Gunsmithing - Roll Pin Holders - 5piece - Gunsmith Tools & Accessories #ad
Grace USA - 8 Ounce Delrin Tipped Brass Hammer - 8DT -Gunsmithing - Hammers - 8 ounce - Gunsmith Tools & Accessories #ad
Grace USA - Gun Care Steel Punch Set - PS7 - Gunsmithing - Steel Punches - 7 piece - Gunsmith Tools & Accessories #ad
Grace USA - Starter Short Pin Punch Set - 5 Piece Punch Set - GRSPP5 - Gunsmith Tools & Accessories #ad
Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad
Wheeler Engineering Roll Pin Starter Punch Set #ad
Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance #ad
TEKTON Gunsmith Punch Set, 18-Piece | 66564 #ad
TEKTON 66061 1/16-Inch Roll Pin Punch #ad


Squirrel Daddy Hollow End Steel Starter Punch Set

#ad
#ad
Squirrel Daddy #ad - Made in the USA. Mil-g-21164d for upper receiver threads, barrel nut installation and buffer tube installation. This high quality hardened steel 7 piece punch set is designed to easily remove roll pins from firearms. Set contains one 1 1/16";, 3/16";, 5/32";, 5/64";, 1/8";, 3/32";, and 7/32"; diameter punches.

Made in the USA. Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. 3" overall length is longer than competitive punches, many uses and can be used for gunsmithing. High quality lube good for any number of applications, hinges, ball bearings, bicycle gears, reels, exercise equipment, even telescope mounts.

Squirrel Daddy Hollow End Steel Starter Punch Set #ad - Aeroshell 64 / aeroshell 33 MS sets the standard with exceptional anti-corrosion and anti-wear performance. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Includes roll-up storage pouch. 9" overall. Start bolt catch roll pin easily with starter punch.

Brass face can be used for driving pins and punches. Professional grade starter punch has a precision tip for holding / starting roll pins.

More information about Squirrel Daddy #ad


Similar products

Aftermarket Tactical Head Wear/Boonie Hat Cap For Wargame,Sports,Fishing and Other Outdoor Activties (Olive Drab) #ad
MARKETTY Gunsmithing Hammer with 4 Tips #ad
gun.deals T-Shirt (X-Large) #ad
Grip 9 pc Roll Pin Punch Set Gunsmithing #ad
Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad
Real Avid .223 Pivot Pin Tool #ad
CVLIFE Two Points Sling with Length Adjuster Traditional Sling with Metal Hook for Outdoors Black 2 Pack #ad
Olight M Series Offset Mount M Series Flashlight Offset Gun Mount, Black #ad
5.56 Extra Long 3/32 Bolt Catch Roll Pin Starter/Finish Punch Set SKU 946 #ad
Tipton Gun Butler #ad


TEKTON 30812 Double-Faced Soft Mallet, 35 mm

#ad
#ad
Michigan Industrial Tools 30812 #ad - 3" overall length is longer than competitive punches, many uses and can be used for gunsmithing. 1 with indexing tips to finish roll pins. Drop forged and heat treated steel. Includes 4 tips. Made to perform under extreme pressure and heat to prevent damage. The srs7 is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch.

The lightweight, increasing the force of each blow, hollow tubular steel handle shifts the weight balance towards the head, especially in confined work spaces.4 pc hollow end starter punch set, hollow tip sizes are 1/8 5/32 3/16 7/32 wiil work with inch and metric pins. Extra soft, non-slip rubber handle grip for ultimate comfort and control.

TEKTON 30812 Double-Faced Soft Mallet, 35 mm #ad - Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy. Our portable. 88oz jar. 5oz grease container makes for easy application of this AR grease with just the tip of your pinky finger. Made in the USA. Mil-g-21164d for upper receiver threads, barrel nut installation and buffer tube installation.

Aeroshell 33ms / mil-g-21164d / mil-spec barrel Nut Thread Grease + 1/2oz can.

More information about Michigan Industrial Tools 30812 #ad


Similar products

Grip 9 pc Roll Pin Punch Set Gunsmithing #ad
QEP 10-18-8 3-Inch Pro Pull Bar #ad
Roberts 10-25 Universal Tapping Block 2.75" x 9.25" x 0.50" #ad
Xage 9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case #ad
Cal-Flor KI75155 Laminate and Engineered Flooring Installation Kit with Tapping Block, Pull Bar and Spacers #ad
Qadira Premium Quality Heavy Duty Aluminum Suction Cup Plate Double Handle Professional Glass Puller/Lifter/Gripper #ad
Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad
8 Pieces Pin Punch Set Tool - for Woodwork/Machinery/Gunsmith/Repairs and Crafts by Xage #ad
TEKTON Gunsmith Punch Set, 18-Piece | 66564 #ad
TuffMan Tools, Roll Pin Punch Set 9pc - Great for Gun Building and Removing Pins #ad