As an Amazon Associate I earn from qualifying purchases.
Gojiny #ad - The bright led lights will draw others attention and make model car cool, realistic. Premium plastic is durable, firm, hard to deform or fade.
Apex RC Products #ad - 3 super bright led lights - great for running at night, or in poorly lit areas. 4. 8v-6. 0v input - can be powered through any spare channel in receiver, if a channel isn't available a y-Harness Apex RC Products #1031 can we used.
If installed in a vehicle with a sealed receiver box we recommend using a 3" or 6" Apex RC Products #1002 or #1006 to make taking the body on and off easier. Will work on many 1/18-1/16 Scale Vehicles & 1/10 Buggies. With the use of our #9025 asin b07bksgw3d electronic switch the light bar can be turned on & off remote via the remote spare channel required.
Includes 4 screws and bolts to securely mount the light bar to the body. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. 55mm long - mounting at 43mm or 58mm with the mounting feet facing in or out see last picture Please measure where you plan on mounting it to make sure it will fit.
TAKANISHI #ad - The bright led lights will draw others' attention and make model car cool, realistic. Premium plastic is durable, firm, hard to deform or fade. This led light working for 1/10 rc crawler TRX4 90046 90048 SCX10 .
HeyMi #ad - Featuremake your rc car cooler and more Attractive after installation, Light Weight, Easy to Carry, Easy to Install, and Durable.
Noteif you have any questions about products, Please Contact us! we will respond for 24 hours. Widely applicationcompatible with traxxas trx-4 scx10 cc01 RC4WD D90 90046 90047 90048 RC Crawler.
Vbestlife #ad - Other accessories are included - including screws and nuts to securely install the light bar to the body. Perfectly matched with many 1 / 18-1 / 16 scale remote control cars and 1/10 off-road vehicles.
Installation method - LED lights can be installed on the roof or hood to prevent rollover. Applicable models - suitable for traxxas 1/18 teton, 1/10 tornado s30 buggy, redcat 1/18 volcano, 1/16 summit, 1/18 ruckus, 1/16 e-revo, ECX 1/18 Temper, 1 / 10 AMP desert buggy and 1/10 booster buggy.
FPVKing #ad - Working voltage: 4. 8-7. 2v, please don't supply above 7. 4v, otherwise the light bar will be too hot. Features: perfect scale size and lightweight, super bright light, easy to install, makes your rc crawler more cool and attractive.
Installation: designed with smaller holes on light bar and bigger screws for tight fastening.
GoolRC #ad - They spend less battery power and keep longer lighting. Honor to serve you!3 light mode: there are 3 light modes including long light, flashing, and breathing.
After-sale guarantee: Any problem, please contact our store without hesitation. Low energy consumption: the bright LED lights are energy-saving. Compatibility: the input voltage of this led light bar is 5-8V, which is a universal type that can be compatible with 1/10 Hsp Redcat Traxxas Tamiya Hpi Rc4wd Axial RC Car.
Woyisisi #ad - Suitable for trx4 90046 90048 SCX10 It can be used on 1/10 rc crawler. Whilst being a high profile so that normal crawling is not limited.
Niiyen #ad - Premium plasticrc light premium plastic is durable, firm, hard to deform or fade. Not limitedwhilst being a high profile so that normal crawling is not limited. Suitablerc led light bar can be used on 1/10 rc crawler.
Keenso #ad - Universal fit：universal for rc crawler, fit for multiple brands of RC car, practical for use. Three modes：rc car roof lamp are made of high‑quality metal and plastic, anti‑wear and anti‑corrosion.
The rc car lights have three modes, long on/strobe/breathing. More attractive：increase the authenticity of the remote control car, make the remote control car cooler and more attractive. Perfect decorative accessories.
1. Gojiny
#adGojiny RC LED Light, 55mm RC Crawler LED Light Bar LEDs Lamp 1:10 RC Car Part Compatible with TRX4 90046 90048 SCX10
#adMore information #ad
Compatible with trx4 90046 90048 SCX10 It would be a great accessory for your RC model car. It can be used on 1/10 rc crawler. Whilst being a high profile so that normal crawling is not limited.| Brand | Gojiny #ad |
| Manufacturer | Gojiny #ad |
| Weight | 0.06 Pounds |
| Part Number | 1486088/120052AM61UK1016 |
More information #ad
2. Apex RC Products
#ad1/18 Rukus, Apex RC 3 LED 55mm Aluminum Light Bar Compatible with Traxxas 1/16 Teton, 1/10 Boost Buggy & More #9040, 1/16 E-Revo, ECX 1/18 Temper, 1/10 AMP Desert Buggy, 1/16 Summit
#adIf installed in a vehicle with a sealed receiver box we recommend using a 3" or 6" Apex RC Products #1002 or #1006 to make taking the body on and off easier. Will work on many 1/18-1/16 Scale Vehicles & 1/10 Buggies. With the use of our #9025 asin b07bksgw3d electronic switch the light bar can be turned on & off remote via the remote spare channel required.
More information #ad
Compatible with the traxxas 1/18 teton, ecx 1/18 temper, redcat 1/18 volcano, 1/16 summit, 1/10 tornado s30 buggy, 1/18 ruckus, 1/16 e-revo, 1/10 AMP Desert Buggy & 1/10 Boost Buggy. Includes 4 screws and bolts to securely mount the light bar to the body. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. 55mm long - mounting at 43mm or 58mm with the mounting feet facing in or out see last picture Please measure where you plan on mounting it to make sure it will fit.
| Brand | Apex RC Products #ad |
| Manufacturer | Apex RC Products #ad |
| Height | 0.79 Inches |
| Length | 4.29 Inches |
| Weight | 0.05 Pounds |
| Width | 3.11 Inches |
| Part Number | #9040 |
More information #ad
3. TAKANISHI
#adLED Light Bar LED Lamp 55mm for 1:10 RC Crawler Car TRX4 90046 90048 SCX10
#adMore information #ad
| Brand | TAKANISHI #ad |
| Manufacturer | TAKANISHI #ad |
| Part Number | FZ0057 |
More information #ad
4. HeyMi
#adRC 12 LED Light Bar Roof Lamp Super Bright Lights for Traxxas TRX-4 SCX10 KM2 CC01 RC4WD D90 90048 RC Crawler 55mm /2.16"
#adNoteif you have any questions about products, Please Contact us! we will respond for 24 hours. Widely applicationcompatible with traxxas trx-4 scx10 cc01 RC4WD D90 90046 90047 90048 RC Crawler.
More information #ad
Led lights/voltage/lengthnumber of led's: 12, configure Voltage: 5V-7V Suggested Power Supply for Receiver, need jst y cable, Configure Installation Length: 2.16inches / 55 mm. Easy to install100% brand new, Install in the frame type, also can install on the roof or front bumper.| Brand | HeyMi #ad |
| Manufacturer | HeyMi #ad |
| Height | 0.69 Inches |
| Length | 1.96 Inches |
| Width | 0.8 Inches |
| Part Number | RC LED 001 |
More information #ad
5. Vbestlife
#adVbestlife Roof Light,RC 4LED Super Bright Roof Lamp 55mm Light Bar for Traxxas 1/16 Teton 1/16 Summit 1/16 E-Revo
#adInstallation method - LED lights can be installed on the roof or hood to prevent rollover. Applicable models - suitable for traxxas 1/18 teton, 1/10 tornado s30 buggy, redcat 1/18 volcano, 1/16 summit, 1/18 ruckus, 1/16 e-revo, ECX 1/18 Temper, 1 / 10 AMP desert buggy and 1/10 booster buggy.
More information #ad
Working voltage standard-4. 8v-6. 0v working voltage, can be powered by any spare channel in the receiver. High-brightness led chip - equipped with 4 high-brightness LED chips, very suitable for operation at night or in places with insufficient light.| Brand | Vbestlife #ad |
| Manufacturer | Vbestlife #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.07 Pounds |
| Width | 0 Inches |
| Part Number | Vbest lifeesgruxwy43 |
More information #ad
6. FPVKing
#adFPVKing RC 12 LED Light Bar Kit Metal Roof Lamp 4.8-7.4V 55mm Axial SCX10 90046 D90 KM2
#adInstallation: designed with smaller holes on light bar and bigger screws for tight fastening.
More information #ad
Just use a screwdriver to push the screws hard into the holes. Application: suitable for scx10 km2 cc01 D90 90046 90047 rc crawlers. Attention: could powered by the receiver, red wire is positvie +, need the JST Y cable, black wire is negative -. Plug into an oppsite way will burn the light.| Brand | FPVKing #ad |
| Manufacturer | FPVKing #ad |
| Part Number | L55 |
More information #ad
7. GoolRC
#ad55mm/2.2in Metal Roof Lamp Light Headlight with 16LEDs Light for 1/10 Traxxas TRX-4 TRX-6 D90 HSP Redcat RC 4WD Tamiya Axial SCX10 HPI RC Car DIY, GoolRC RC LED Lights Bar
#adAfter-sale guarantee: Any problem, please contact our store without hesitation. Low energy consumption: the bright LED lights are energy-saving. Compatibility: the input voltage of this led light bar is 5-8V, which is a universal type that can be compatible with 1/10 Hsp Redcat Traxxas Tamiya Hpi Rc4wd Axial RC Car.
More information #ad
Exquisite workmanship: the metal bar on the matte surface is durable, wear-resistant, and has a good texture and exquisite details, and each edge is smooth. The lighting mode can be switched through the third channel of the remote control or the mainboard button.| Brand | GoolRC #ad |
| Manufacturer | GoolRC #ad |
| Part Number | UZN7343399159110TH |
More information #ad
8. Woyisisi
#ad55mm RC Crawler LED Light Bar LEDs Lamp 1/10 RC Car Part for TRX4 90046 90048 SCX10, Woyisisi RC LED Light Bar
#adMore information #ad
It would be a great accessory for your RC model car. The bright led lights will draw others' attention and make model car cool, realistic. Premium plastic is durable, firm, hard to deform or fade.| Brand | Woyisisi #ad |
| Manufacturer | Woyisisi #ad |
| Part Number | Woyisisif3tw5bk8cz |
More information #ad
9. Niiyen
#ad55mm RC Crawler LED Light Bar LEDs Body Shell Roof Lights Lamp 1:10 RC Crawler Car Part Accessory fit for 90046 90048 SCX10, Niiyen RC LED Light Bar Kit
#adMore information #ad
Suitable for trx4 90046 90048 SCX10 Cool and realisticthe bright led lights will draw others' attention and make model car cool, realistic. Great accessoryrc light bar would be a great accessory for your RC model car.| Brand | Niiyen #ad |
| Manufacturer | Niiyen #ad |
| Height | 0.59 Inches |
| Length | 2.17 Inches |
| Weight | 0.06 Pounds |
| Width | 0.59 Inches |
| Part Number | Niiyenp21uebm6nr |
More information #ad
10. Keenso
#adThree Modes,Fit for hsp RC Car,Scale RC Crawler Car, Keenso 16pcs LED RC Car Light Bar,55mm,RC Car Roof Lamp,Universal Roof Lamp LED Light Bar
#adThe rc car lights have three modes, long on/strobe/breathing. More attractive：increase the authenticity of the remote control car, make the remote control car cooler and more attractive. Perfect decorative accessories.
More information #ad
Thank you again for your support to KEENSO. Customer service：keenso provides you with professional customer service, please contact our customer service staff immediately, if you have any dissatisfaction with the product, please do not give a bad review, we will immediately take action to your satisfaction. Easy installation：easy to install, simple and fast. Durable and not easy to deform.| Brand | Keenso #ad |
| Manufacturer | Keenso #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.04 Pounds |
| Width | 0 Inches |
| Part Number | Keensoz0x9v5g4wb |
More information #ad
