As an Amazon Associate I earn from qualifying purchases.
iFlight #ad - 100% service, any question or problem just contact our seller first! thank you! Iflight beast f7 v2 55a aio board adopt BGA chiset, improved electrical and thermal performance. No soldering, easy setup.
HGLRC #ad - Click the orange Button to Buy Now :. Choose us risk free today. Support receiver support direct welding installation of receivers such as TBS NANO, XM+, etc. Wifi tuning built-in WIFI function is more convenient to adjust parameters.
BETAFPV #ad - F722 aio 35a toothpick fcbetafpv newest 35a aio toothpick brushless flight controller comes with F722 chips and BLHELI_S ESC firmware. It is perfectly suitable for 4-5inch toothpick drone.
Performanceit can handle 35a continuous current40A burst, totally supports the 2-6S lipo battery, brings the drone a stronger flight performance. Compatible drone&motorsf722 aio 35a fc supports 2-6s batteries, compatible with 14xx 15xx 16xx 18xx 20xx FPV brushless motors.
6 full uarts6 full uarts are available on this f722 aio 35a board. Increased the optionality of external devices. Support dji digital vtxcome with a 6-pin pluggable connector cable, specially designed for DJI digital VTX system, which is convenient for installation.
iFlight #ad - 3. Mounting pattern: 25. 5*25. 5mm/φ3mm, with micro usb connector. 1. Succex-d f4 aio board is the superb board layout allowing for easy and clean builds.
iFlight #ad - 5. Micro 5. 8g pit/25/100/200mw switchable fpv transmitter vtx with irc tramp function helps setting frequency point, power and FC parameter directly, use Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
1. The built-in osd chip helps to monitor the status of the flight data any time, integrated programmable RGB LED port. 2. The micro fc, and vtx neatly stack together, ESC, highly integrated with all the latest features, optimized internal circuitry, with pinned interconnects that make your build easy to assemble and cleaner looking.3
3. Micro f4 flight control has been optimized overall. 4. 15a 4 in 1 micro esc dshot600 blheli_s 2-4s esc support dshot, etc. Succex 16x16mm micro f4 flight tower is specially designed for Micro FPV race quad micro new compact and concentrated into a three-layer tower structure. The soldering pad is semi-extended, Multishot, Oneshot, save more room but solid.
BETAFPV #ad - Betafpv 12a/20a aio flight controller will unify the UART, which is convenient for pilots to solder. F405 chipthe fc totally handle 20a continuous current22a burst, gives pilots a powerful flight.
Compatiblef405 aio 20a fc is compatible with 110x/120x/140x series motors, pilots can build a bigger quad with this powerful FC to save weight and size like Beta95X. Ultralightbetafpv f405 2-4s aio 20a fc board thickness from 1. 6mm to 1. 2mm, which reduced the weight to 5.
BETAFPV #ad - Frsky receiverit pre-flashed with Frsky FCC protocol in default. Integrated 25mw vtxintegrated 25mw vtx, no need to solder an external VTX, more convenient for installation and it saves the weight of the weight-sensitive whoop drone like Meteor65.
Compatible dronef4 aio 1s brushless flight controller comes with F411 chip, it is specially designed for 1S brushless whoop drone like Meteor65, HX100 SE.
FEICHAO #ad - The pcb adopts high-end 8-layer 2oZ thick copper skin, which has stronger overcurrent capability and good heat dissipation. Using industrial grade lDO and high-quality Japanese Murata capacitors, high temperature resistance and strong filtering performance.
BETAFPV #ad - We offer a exchange service for all sale goods within half a year! If you have any questions, you can contact us by email, and we will definitely reply you within 24 hours. Compatiblethis f4 1s 12a fc board integrates the receiver with the most popular radio link ExpressLRS in 2021 and designed for long-range 3inch ultralight toothpick drones, be compatible with most 1S 3" frames.
This makes expresslrs one of the fastest RC links available while still offering long-range performance.
At the same time, all the pads are left for the external receivers with UART1 and UART2, 2 programmable RGB LEDs, etc.1s 12a escmost of the 1s flight controllers on the market come with 5A ESC, this FC especially integrates 1S 12A ESC which can provide more sufficient power for 3" toothpick drones. Configurationthis flight controller is built-in current meter, for buzzers, and ExpressLRS receiver.
1. iFlight
#adIFlight Beast F7 V2 55A AIO Flight Controller Board FPV F7 AIO Board 25.5x25.5 Mounting for Cinewhoop Quadcopter Drone like Protek35
#adMore information #ad
Plug and play for dji fpv air unit and for vista HD system. Gold plated pins, no oxidation, better contacts. Built with higer capacity 8MB blackbox. Mounting pattern: 25. 5*25. 5mm φ3mm dimensions: 32. 5*32. 5mm. F7 built with high power mos, good heat dissipation, max current flow support 45a.| Brand | iFlight #ad |
| Manufacturer | iFlight #ad |
| Part Number | 0 |
More information #ad
2. HGLRC
#adHGLRC Zeus5 AIO 1S 2S with WiFi Function F411 Flight Controller 5A BLS 4in1 ESC for Whoop Toothpick FPV Racing Drone Quadcopter
#adMore information #ad
Why choose us we are the original hglrc manufactory, If there are any question or need help, just feel free contact us, we will always here help you out within 24 hours . Easy to connect it supports two motor connection methods, direct plug and wire bonding. Tiny size ultra-lightweight design integrating F411 flight control and 4-in-1 ESC.| Brand | HGLRC #ad |
| Manufacturer | HGLRC #ad |
| Part Number | HGLRC20201202 |
More information #ad
3. BETAFPV
#adBETAFPV F722 35A 2-6S AIO Brushless Toothpick Flight Controller BLHELI_S 35A ESC No RX with XT60U Connector for 4-5inch Toothpick Drone 2-6S FPV Brushless Motor
#adPerformanceit can handle 35a continuous current40A burst, totally supports the 2-6S lipo battery, brings the drone a stronger flight performance. Compatible drone&motorsf722 aio 35a fc supports 2-6s batteries, compatible with 14xx 15xx 16xx 18xx 20xx FPV brushless motors.
More information #ad
Pilots can use for VTX, external receiver, GPS etc. It can provide you a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. 6 full uarts6 full uarts are available on this f722 aio 35a board. Increased the optionality of external devices. Support dji digital vtxcome with a 6-pin pluggable connector cable, specially designed for DJI digital VTX system, which is convenient for installation.
| Brand | BETAFPV #ad |
| Manufacturer | BETAFPV #ad |
| Part Number | 00313830 |
More information #ad
4. iFlight
#adIFlight SucceX-D F4 Flight Controller 20A ESC AIO Whoop Board MPU6000 for Tiny Whoop Cinewhoop FPV Racing Drone Quadcopter Work with FPV Air Unit
#adMore information #ad
2. Plug and play for dji HD FPV system, no need to solder tiny wires. 4. Input support: 2-4s, BEC output: 5V 2A. 5. If you like to make this board work with other radio transmitter, please check our wiring diagram carefully.| Brand | iFlight #ad |
| Manufacturer | iFlight #ad |
| Part Number | 0 |
More information #ad
5. iFlight
#adIFlight SucceX Micro F4 V2.1 Flight Controller Stack 2-4S F4 FC + 4 in 1 15A ESC BLHeli_S + 5.8G Pit/25/100/200mW Transmitter VTX for FPV Micro Racing Drone Quadcopter
#ad1. The built-in osd chip helps to monitor the status of the flight data any time, integrated programmable RGB LED port. 2. The micro fc, and vtx neatly stack together, ESC, highly integrated with all the latest features, optimized internal circuitry, with pinned interconnects that make your build easy to assemble and cleaner looking.3
More information #ad
33. Micro f4 flight control has been optimized overall. 4. 15a 4 in 1 micro esc dshot600 blheli_s 2-4s esc support dshot, etc. Succex 16x16mm micro f4 flight tower is specially designed for Micro FPV race quad micro new compact and concentrated into a three-layer tower structure. The soldering pad is semi-extended, Multishot, Oneshot, save more room but solid.
| Brand | iFlight #ad |
| Manufacturer | iFlight #ad |
| Weight | 0.02 Pounds |
| Part Number | 0 |
More information #ad
6. BETAFPV
#adBETAFPV F405 2-4S AIO 20A V3 Brushless Whoop Flight Controller No RX BLheli_S 20A ESC with XT30 Connector for 2-4S Brushless Motor Like 11XX 12XX 14XX Series Motors
#adCompatiblef405 aio 20a fc is compatible with 110x/120x/140x series motors, pilots can build a bigger quad with this powerful FC to save weight and size like Beta95X. Ultralightbetafpv f405 2-4s aio 20a fc board thickness from 1. 6mm to 1. 2mm, which reduced the weight to 5.
More information #ad
28g while improving the ability of the ESC to continuous current 20A. New layout designedcompleted the gap mounting hole, perfectly prevent the damping rubber from falling off, super easy for installation on most of whoop frame. Pluggable connectorbetafpv f405 aio 20a flight controller integrated digital VTX connector and receiver connector, just plug and play, which is convenient for installation.| Brand | BETAFPV #ad |
| Manufacturer | BETAFPV #ad |
| Part Number | 00313857 |
More information #ad
7. BETAFPV
#adBETAFPV F4 1S AIO Brushless Flight Controller SPI Frsky FCC 5A ESC Integrated 25mW VTX with BT2.0 Connector for 1S FPV Brushless Whoop Drone Like Meteor65 FPV Micro Whoop Drone
#adCompatible dronef4 aio 1s brushless flight controller comes with F411 chip, it is specially designed for 1S brushless whoop drone like Meteor65, HX100 SE.
More information #ad
Plug&play connector for cameracome with a 3-pin connector for connecting C01 micro camera and 6-pin connector for Nano HD camera directly, it is convenient for installation, no soldering needed, just plug and play.| Brand | BETAFPV #ad |
| Manufacturer | BETAFPV #ad |
| Part Number | 00313785_1 |
More information #ad
8. FEICHAO
#adFEICHAO F411 20A/35A ESC AIO 2S-6S BLHELI_S Flight Controller MPU6000 for Frsky/ Futaba/ Flysky/ TBS Crossfire/ DSM-X DSM-2 Receiver 20A
#adMore information #ad
Note: 20a for 2s-5s, 35a for 2s-6s ; led: support WS2812 and other programmable. Mos adopts imported 30V high current resistance mos, long life and strong load capacity. Support : for frsky/ futaba/ flysky/ tbs crossfire/ dsm-x: dsm-2 receiver, pwm / Oneshot42 / Multishot / Dshot150 / Dshot300 / Oneshot125 / Dshot600 Protocol.| Brand | FEICHAO #ad |
| Manufacturer | FEICHAO #ad |
| Part Number | F40664 - F40665 |
| Model | Z40664 |
More information #ad
9. BETAFPV
#adBETAFPV ExpressLRS 2.4G F4 1S 12A AIO Brushless Flight Controller with 12A ESC Type-C USB Port Dipole T Antenna Compatible for 1S Ultra-Lightweight 3" Toothpick Drones or 65/75mm Racing Drone
#adThis makes expresslrs one of the fastest RC links available while still offering long-range performance.
More information #ad
Technical support & warrantywe have a professional team and considerate after-sales service. Expresslrs expresslrs is an open-source rc link for rc applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. At the same time, all the pads are left for the external receivers with UART1 and UART2, 2 programmable RGB LEDs, etc.1s 12a escmost of the 1s flight controllers on the market come with 5A ESC, this FC especially integrates 1S 12A ESC which can provide more sufficient power for 3" toothpick drones. Configurationthis flight controller is built-in current meter, for buzzers, and ExpressLRS receiver.
| Brand | BETAFPV #ad |
| Manufacturer | BETAFPV #ad |
| Part Number | 01040001_2 |
| Model | 01040001_2 |
More information #ad
